Growing with cloth planters, the cheapest and easiest way to do raised bed gardening?

This summer I am trying out these new cloth raised bed planters/pots. Supposedly since these are breathable the roots of plants in them will air prune when they get near the fabric. Which should give a more robust root system and also better aeration. Check out my future videos to see how my plants are doing. I have links and more info below on where I got these planters.

30 gallon bags I had issues with the fabric beside the handles ripping when trying to move these however they are loaded quite heavy so maybe with a lighter mix they would be fine for moving around, plants are growing well in them, watch for my update video to see the damage and how the plants are doing.

15 gallon bags these bags are really awesome I have all my tomato plants in them and they look to be doing very well the oldest 2 are already blooming and looking very healthy. These bags were also awesome for moving dirt with as seen in the video.

Using the Field Cultivator to prep the garden with my Kubota B2320

I use my field Cultivator to prep last years garden for this years planting. I plan to plant potatoes, beans/peas and possibly some corn along the tree side. I cut this field cultivator down to around 4-5 foot to fit behind my tractor better. There are 5 tines I could add more, but 5 do a good job and are relatively easy to pull.

I have read that a Field Cultivator does a much better job loosening your soil for planting than a tiller. Which is because it does not disturb the layering of the soil. Or what is living/dormant in those layers as much as a tiller does. Also it is less likely to kill worms and other beneficial animals living in the soil.

New Ryobi 40v 14″ chainsaw kit un-boxing and first use model RY40530

In this video I un-box the brand new Ryobi 40v 14″ chainsaw kit. This is the newest model of there 40v chainsaw that just came out about a month ago.

I picked up the newest 40v attachment capable trimmer also and will be doing more videos on that as well. So don’t forget to subscribe and hit the bell to be notified when those come out.

A small tractor update and import grease zerk Kubota B2320.

I point out where some of the kill switches are on this kubota B2320 tractor. You should know where these are so that if you get a no start you can troubleshoot it easily. Also where to grease the forward and reverse hydro static levers so that it resets to the neutral position. If you don’t keep this zerk lubed it can cause the tractor to move when you don’t want it to. Also it can cause the tractor to shut off as soon as you get off the seat.

Epic Gas Can Spout that replaces most broken & junk self venting spouts

I got sick of my gas can spouts not working properly, slow flow not working at all or spilling. So I replaced the broken/defective spouts on several of my gas cans with EZ-Pour Kits. That I purchased on amazon you can find them here fur under $12 dollars shipped with prime.

I have purchased 3 of these kits and plan to buy more to do the rest of my larger cans. These may not work well on smaller cans, used for filling chainsaws etc, I think the nozzle may be to large for those purposes. If they make a kit with a smaller nozzle I may try converting those as well when needed.

A better way to fill the winter stock tank, no more garden hose/shoveling

I got sick of fighting with the coil garden hose and shoveling snow to the faucet/stock tank. So after a bit of contemplation I came up with a good inexpensive solution, solid drain hose. You can pick up a 100 foot roll 4″ diameter for less than 40 bucks at your local hardware store.

I then cut a hole at the end so that it would fit over the outside faucet. Then ran it down into my stock tank and tied it secure at both ends. Of course your stock tank will need to be lower than your faucet for this to work.

Now all I have to do is turn the valve inside my house to start filling. Also since its a 4″ diameter pipe its very unlikely it will ever freeze up. Drain pipe is also easy to work with, a razor blade will cut it quite easily, and its light weight/durable.

Diy setup to easily pull 330′ field fence through trees where a tractor won’t fit.

A simple setup so that you can easily pull field fence from a fixed point between and around trees. This is a follow up to my original video where I showed this same system to pull field fence using a tractor. In that case the fence was anchored and the tractor driven away the roll unrolling behind it. I used the same setup in this video you can get the swivel caribeaner here .

Easy way to run 330 foot rolls of woven wire field fence.

I use a swivel carabiner, a 3 point hoist etc to make running rolls of woven wire field fence easier. I also did a second video showing how you can just pull the fence through the woods with this setup . It really shows how well this swivel hook works they have doubled the price since I bought it though. I have as of yet not seen anything less expensive though.